Hot water, Technical data – LELIT PL60 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Engh'sh

Hot water:

24.

25.
26.

27.

Check that the

tank cont^ns

water.

ATTENTION: the i^ernal tank has a special floating device

that controls the water

level. In case of lack of water, the water missing pot light (17) comes on automaically and at the same time the sound

aarm buzzes. Please fl the water tank Wth water (as descritied under Parting the machine, points 3-5): this Mil shut
of the

pot light (17) and the buzzer, confirming that the water level is suitable. NB: the water tank must be fed

in

wth water tl the MAX level indicated on the appance body.
Wat till the coffee ready pot light (4) comes on.

Place a mug under the hot water faucet (11) and press the hot water switch (20) up: the pot light (21) confirms the

sarflng. Once you get the desired amount of hot water press the switch (20) down to sop dispensing.

After having taken hot

water,

always check that there is

stNI

water

m the

tank

and

if

it is necessary, f the water tank

as indicated at point 24.

ROUTINE MAINTENANCE AND PRECAUTIONS:

- Clean up the seam tube (10) after every use.
-

Use a normal damp doth to dean the machine.

-

Do not leave the machine outdoors.

-

Do not immerse the machine in water.

-

Use the machine onlyi under adult control and keep it away from chNdren's reach.

-

Do not wash fers and fer hdder in the dishwasher.

-

During normal funcfloning some parts of the appance

body can reach high temperatures: pease handle wth due

caution!

ATTENTION: the machine is equipped wth a water tank of 2.71 wth missing water sensor connected to an farm pot light

(17) and also to a buzzer. The sound of the buzzer caused by the lack of water at sartng the machine is different from the
sound made to indicate

the

lack of water during

normal funtioning. The

restoration of the suftable water

revel

wil shut of

te aarm pot light (17) and te buzzer. If the water flnishes during te normal funtioning the missing water sensor wil

aow 15sec. of time to flnish the coffee; once the coffee is done the water tank must be fed wth water till the max level
indicated on the appance body.

We suggest reading the instrucflon booklet carefully and checking the water level in the water tank regularl'/.

Water softener included %nsered on the ^astic tube, inside the water tank): one way water softener for espresso

machines. It proects

the machine from limestone residues. It needs to be replaced

accordng to the water hardness and

consumpion foNowing te below table:

Water hardness

Quantity

10°F

90 It

20°F

45 It

27°F

35 It

35°F

23 It

45°F

20 It

NB: I's

is

necessary

to

replace the

resin

f er as indicated above otherwise

the

limestone residues

can

damage the coffee

machine (the warranty does not cover this type of damage).

Technical data:

Power suppl'y: 220-2304: 50Hz - 220-2304: 60Hz

Cofee heating dement: 1000W
^eam heating Sement: 1200W
Cofee pump pressure: 12/15 bar

Pump on coffee boNer (ULKA): 48W -- Pump on seam boNer (ULKA): 21W

WOer tank capacity: 2,7 litri

Cofee boMe r capacity: 250 ml - ^eam boNe r capacity: 400 ml

Dmensions (HxLxP): 30x30x42 cm - Net Weight: 10,5 kg

To be operaed wth ground coffee or coffee pods

Advertising