Specifications – Directed Video DP1020 User Manual
Page 38
SPECIFICATIONS
Supply voltage: 12V DC (11V-15V), test voltage 14.4V, negative ground
Current consumption: Less than 2A
Battery charge voltage: 12V DC
Signal system: Compositive video 1.0±0.2Vp-p 75.
Discs played:
(1) DVD-VIDEO disc
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3/MP4)
(3) VIDEO CD
Audio output level: 10k. (2 ch 2.0±0.5Vrms)
Audio signal output characteristics:
(1) Frequency response: 20 Hz-20 kHz
(2) S/N ratio: 80 dB (JIS)
(3) Wow and Flutter Below measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
38
© 2006 Directed Electronics—all rights reserved