Dodge 2009 Journey - Manual (Page 99)

To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
UConnect
௡ website may also provide detailed instruc-
tions for pairing.
The following are general phone to UConnect
௡ system
pairing instructions:
• Press the PHONE button to begin.
• After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone Pairing.Љ
• When prompted, after the beep, say ЉPair a PhoneЉ and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you will be prompted to
give the UConnect
௡ system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, with 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect
௡ system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect
௡ system. The priority allows the
UConnect
௡ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect
௡
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to
ЉAdvanced Phone
Connectivity Љ in this section).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97
3