NewAir ADS-500 - Manual (Page 3)

ew^oo= ■'
scription :
Anionic Yellow
OPERATIONS:
Please set the appliance on a flat and well-ventilated place.
•Before plugging in, please switch off the appliance by pressing the power button
on the AC/DC Adapter.
•Connect the adapter to the main body of the dehumidifier.
Note: The D. C. plug is unable to be inserted into the D. C. socket in the wrong
direction.
•Press the dehumidified button to the on position. The power LED (red) will be off
and the dehumidified LED (green) will be on when beginning operation.
•When the water tank is full, the water full LED (red) will turn on and operation will
stop automatically.
•The unit will switch off automatically and the red LED indicator will illuminate
when the water tank is full.
•Before emptying the water tank, turn off the dehumidifier by pressing the power
button from 1 to 0.
•Hold the top of the unit and grasp the handle of the water tank to pull out the tank
completely and remove it.
•Discard the water and empty the water tank.
Carefully insert the tank to its original position and fix the plug.
•When the power is on, press the Anionic Button On (1) and the
corresponding.Anionic LED (yellow) will be lighted.
Notice: Please turn on the power before using the negative ion function.
-
4
-