Dolby Laboratories FLX-1910 - Manual (Page 20)

18
Chapter 2 Installing the LCD TV
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to display the Input List. Use the ▲▼ buttons to select
TV and press the OK button.
Press the OK button to display the received channel list, then press ▲▼ to select a
channel. Or, use the ▪ with 0-9 buttons to select digital channel( for example 9.1)
The digital main channel might include many subchannels (for example 9-1, 9-
2..) that are showing program at the same time.
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.
TV Select Exit
Channel Scan
Tuner Mode Cable
Channel Skip
Favorite List
Time Zone Eastern Time
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Press the ▼ button to select Channel Scan, and press the OK button.
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
Status: Scanning..... Cable
Analog Channels: 25
Digital Channels: 0
47%
Input Source
TV(CABLE/AIR)
VIDEO1 (AV)
VIDEO2 (S-VIDEO)
VIDEO3 (YPbPr)
VIDEO4 (HDMI)
COMPUTER(VGA)
Channel List
7-1 KABC-DT
9-1 KQED-HD
9-2 KOED-SD
8 CCT
12
13
15