Accutone General Telephone Headset - Manual (Page 4)

iii. basic understanding of telephone headset adaptor
hooking up a standard telephone headset adaptor *
The C100 adaptor does not require battery to operate. First of all, put on a
telephone headset, lift the handset from the telephone cradle and place it off-
hook. Make sure the Headset/Handset button is pressed down to Headset
position, and the Mute button is in Talk position.
TALK
MUTE
you to place a caller on hold by pressing it down to the Mute position. When
the button is pressed down, the caller cannot hear from you, but you can still
hear from them. To resume the communication, press it again to release the
button back to Talk position.
1
2
3
4
A
B
C
When the Headset/Handset button is
pressed down, you can communicate
with the caller through the telephone
headset. Press it again, you can pick up
the telephone handset for your
conversation instead of the telephone
headset.The Mute/Talk button enables
Open the cover of the C100. There are two
selectors marked 1, 2, 3, 4 and A, B, C. These
selectors create twelve possible settings for
highest compatibility. Try the setting one-
by-one until you can hear a clear dial
tone through the telephone headset.
Note that there may have two matching settings, choose the clearer setting
or either one if both perform the same. There is at least one setting which
match your telephone. The simplified version of C333 also have these two
selectors, and the configuration method is exactly the same as the C100.
iv. choosing and connecting your telephone amplifier
telephone-only amplifier vs pc/telephone amplifier
There are basically two types of telephone amplifiers from Accutone,
telephone-only amplifiers are designed for teleconversation-intensive
application, namely professional call-center markets. They are much better
in terms telephone compatibility, acoustic quality and power-consumption.
However PC/Telephone amplifier are much more flexible and offers
convenience for users to switch from traditional fixed-line teleconversation
to VoIP chat. These amplifiers are more targeted to the general offices and
corporations.
*
connecting your telephone headset to an amplifier *
Accutone headsets are fully compatible to all
types of Accutone telephone amplifiers*, and
they all connect together in a similar way, by
plugging the modular plug into the front jack
of the amplifier.
For further information about setup and
configuration with a telephone amplifier,
please refer back to the respective manuals of
each individual amplifiers.
2200 Amplifier
Trademark and Ownership: Accutone and the logo design combined are trademarks or registered
trademarks of Accutone Technologies Limited. Accutone Technologies Limited 2005. All rights reserved. Do no
make illegal copies of this user manual.
operating and configurating the C100 adaptor *
C100
telephone
headset
adaptor
Connect all plugs and sockets of the C100 according the above or simply
follow the icons embossed on the unit. C333 hooks up in a similar way.
* All Accutone headsets except TM1200 with online-LED indicator, which is designed to be paired with the
Series 1200 Amplifier to operate properly.
C333
telephone
headset
adaptor
The C100 is designed to offer extra convenience on top of compatibility
function, that's why it has a Headset/Handset button which enables you to
choose between using handset of your telephone base unit or the telephone
headset provided.
to handset
jack
to headset to headset
to handset
jack