Accutone A20 User Manual
Page 4
part a. getting comfortable.
Hooking all the parts together!
A.2
Hooking all the parts together!
A.2
5
4
A.2.1 Connect to Telephone
Unplug the handset cord from your telephone base unit and insert it to the
Modular Jack for Telephone Handset (2). Use the phone cord provided
with RJ-11 modular plug on both ends to connect the control unit to your
telephone. Plug one end of the cord to your base unit (A) and the other end
to the Modular Jack for Input from Telephone Unit (3) on the back of the
unit.
A.2.3 Connect to Telephone Headset
The A20 Omega Telephone Amplifier provides the choice of using any
Accutone Telephone Headsets equipped with a RJ-11 Modular Plug (except
TM1200) according to your preference.
On all Accutone Telephone Headsets pairable to an amplifier, they should be
equipped with a Quick Disconnecting Cable (QD). This special feature is
designed for users who are always on the move. Simply unplug the cable as
shown below when you need to leave your desk, and plug it together again
to continue using the unit.
Plug in the telephone headset to the RJ-11 Modular Jack for Telephone
Headset (16) on the front panel of the A20 Omega amplifier.
16
QD
A
2
3
part a. getting comfortable.
connection & preparations.
connection & preparations.
A.2.2 Connect to Computer
T h e A 2 0 O m e g a s u p p o r t s
connection to both PC soundcard as
well as most recording devices in the
market. Comes together with the
amplifier is a Soundcard/Recording
-Jack cable (J) which connects to
the PC/Recording Machine Jack
(5). Connect the cable, and plug the
plugs as illustrated to the respective
jack in your soundcard or use the
recording jack for plugging your
recording machine.
5
J
to soundcard
to recording machine