Iii. using your atp550 console amplifier – Accutone Two-prong Amplifier User Manual

Page 3

Advertising
background image

Put on your Headset and Adjust for Comfort

All of Accutone's telephone headsets have extendable headband as well as
rotatable and flexible microphone boom, so you can adjust the headband to
fit your head size and adjust the boom so that the microphone capsule are
located as illustrated.

1/2"

1/2"

Position the microphone capsule approximately 1/2" from your mouth. The
top of the microphone capsule should be facing towards your mouth.

Although you most likely don’t need to, and are not recommended to, you
can make adjustments to the microphone gain level. Please note that this
adjustment is not meant to be a volume control, it is a gain level matching
between the headset and the console. Hence this should be set only once.

Again, make a call to someone, while you are talking, use the mic gain
adjustment tool supplied to slowly turn the (3) Mic Gain Adjustment.

Adjust Headset Microphone Gain Level

iii. using your ATP550 console amplifier

Adjust Headset Speaker Volume Amplification

4

turn right to increase

In order to tune the sound
volume of your headset to your
preference, with everything
connected properly, make a call
using your console telephone.

Turn (4) the speaker volume
control towards right to
increase volume, and vice versa
to reduce.

Be careful not to over turn the
control, as high speaker volume
may cause damage to your ear
or the telephone headset.

2

Slowly and carefully turn the trimmer clockwise to increase the
microphone gain level. With this, the person you are calling should be able
to clear your louder.

If the level is too loud, or if you start to hear “squealing” sound, this means
that the microphone gain level has been set too high, and the noise is a
feedback sound with the headset speakers. Stop and turn the trimmer back
counter-clockwise to reduce gain level.

clockwise to increase

iii. using your ATP550 console amplifier

!

Again, you should be careful when making this adjustment, as the
feedback “squealing” sound at a high level can severely damage
your hearing as well as the headset.

fine-tuning adjustment only

do not overturn if the mic

volume is still not enough.

4

Advertising