Accutone USB400 - Manual (Page 7)

B
Installing your headset.
Installation.
TM B5. installing AccuSound Software
The next screen will show you
installation details, like destination
folder and user information.
Click Install to continue installation.
After a few minutes of copying files,
this screen will pop up indication the
TM successful completion of AccuSound .
Click Finish to exit installer.
Please read carefully the End-User
TM Licence Agreement for AccuSound .
Select “I accept the terms in the
license agreement”
Click next to continue installation.
USB400 - Installation Guide & User Manual 11 12 USB400 - Installation Guide & User Manual
Operation.
[ inspiring people, inspiring change ]
C1. operating the Digital Audio Controller (AU400)
The AU400 Digital Audio Controller is an interactive remote control that directly
communicates with your PC. Adjusting the volume controls here actually changes the
volume settings in the operating system.
Note that the 4-direction controlling switch is designed for moving in the
specified four directions only. Do not try to press it downward like a button, as
this may result with either muting the speaker or microphone unexpectedly, or
worse may damage the controller itself.
If you are unsure of whether you have accidentally activated any mute function, always
check the LED-indicator to make sure. For details to the various LED-status, please
refer back to p.6 of this manual.
Click the toggle switch to right once, the LED
turns to Red and mutes the speaker. Click the
toggle switch to right again to unmute.
Click the toggle switch up to increase speaker
volume.
Click the toggle switch down to decrease
speaker volume.
Click the toggle switch to left once, the LED
turns to Blue and mutes the microphone. Click
the toggle switch to left again to unmute. The
LED on the controller turns back to White.
Multi-status LED indicator
connecting the computer
adjusting the headset
multi-status LED indications
installing driver & software
TM installing AccuSound software