Accutone AU300 User Manual
Page 4
Hooking all the parts together!
1 CONNECTING THE HEADSET
Connect the headphone plug (marked with the headphone logo) and the microphone
plug (marked with the microphone logo) of the stereo headset with the respective jacks
of the USB adaptor.
Setup new device from your computer.
2 CONNECTING TO THE COMPUTER
Connect the USB plug extended from the USB adaptor with the USB port of your
notebook or desktop computer. The LED indicator will light up indicating correct
connection to the computer.
3 LED INDICATIONS
4 INSTALLING USB DRIVER & SOFTWARE
The LED-indicator on the AU300 adaptor is able to display various status of the device,
and the definitions are listed as below:
To begin, you should restart your computer, and when your operating system finishes
loading, connect the AU300 USB adaptor to any USB port in your computer. This
manual will use Windows XP interface as demonstration but the steps should be
identical for Windows 98SE, ME or 2000 versions.
(1) Connect AU300 USB Adaptor to USB port of computer
(2) Insert "Driver & Software Installation CD" into your CD-ROM
(3) Setup program should start automatically
(4) If Setup program doesn't start, go to the root directory of your CD-ROM and click
on the setup.exe file
microphone
headphone
to USB port
accutone USB adaptor - installation guide & user manual
installing USB driver
connection & setup
steady GREEN light
STANDBY MODE
flashing GREEN light
OPERATING MODE
steady AMBER light
MUTED STANDBY
flashing AMBER light
MUTED OPERATING
the device is in
standby mode, ready
to receive or
transmit voice data.
the device is
operating, meaning
voice data is being
received or
transmitted.
the device is in
standby mode but
microphone is
muted and no data
is coming in or going
out.
the device is
operating, but
microphone has
been muted, the
device can receive
data but not
transmit.
Please note that after you plug in the AU300 USB adaptor, your operating system
may automatically launch the Hardware Installation Wizard. You should abort
such installation by pressing cancel, because you should use the Driver Software
CD for optimal performance.
* For setup instructions and troubleshooting of AU300 with Apple Macintosh OSX, please refer to our website at
http://www.accutone.com.hk