Accutone WT89 - Manual (Page 7)

[ inspiring people, inspiring change ]
11 12 12
Appendix. installing (optional) handset lifter
The handset lifter connects to the
bottom of the WT89 base unit. When
user press the online button of the
headset, a signal will be sent to the base
unit and subsequently to the lifter to lift
the handset from its cradle.
To connect the lifter, insert the Lifter
Plug (W) into the Lifter Connector (G)
located at the back of the base station
(the right-most jack).
There are two stickers on the bottom of the
lifter, peel off the sticker-cover and stick it on
top of the telephone cradle as shown on the
right.
Apply light pressure as shown to make sure
the lifter stays in place.
Lifting height can be adjusted by switching
(S) to top for the highest uplift.
The LED Indicator (T) lights up when you
press the Answer Button (5) on your
headset, indicating online status.
C. ENJOYING YOUR WT89 HEADSET
total wireless solution in action!
Optional Installation Product in Action
C4. tone adjustments
The WT89 has a unique feature which is
perfect for users who have a weaker sensitivity
to a particular sound pitch. When the signal is
weak or the background noise is loud, these
users will have a hard time hearing the caller.
The tone adjustment feature enables users to
change the pitch of the sound coming out the
speaker allowing them to select the tone which
seems clearer or louder to them.
Press Tone Increase (E) and Decrease (F)
button to test this.
+ E
F
C5. page function and reception range
+
To locate the headset, press the Page
Button (D), the Online / Paging Indicator
(B) will light up blue, and the wireless
headset will generate a low beeping
sound. The Status Indicator (6) on the
headset will also flash blue during paging.
The paging will stop after a while or if any
button is pressed on the headset of the
base unit.
Depending on obstacles within an
environment, the WT89 can cover a 50m
radius range in any typical office settings.
B
D
W
S
T