Wt99 wireless telephone headset – Accutone WT99 User Manual

Page 9

Advertising
background image

[ inspiring people, inspiring change ]

Troubleshooting

Product in Action

K. Volume Adjustments

To adjust the speaking/microphone
volume of the headset, press the

Microphone Volume Buttons

on the base station.

To adjust the listening/speaker
volume of the headset, you can
either press the

Listening

Volume Buttons of the base station
or the

Listening Volume Knob

on the top of the headset.

Note that the headset must be in
talking mode to adjust volumes.

(10)

(12)

(13)

10

12

13

To mute the microphone of the
headset, simply press the

Microphone Mute Button on the
headset.

The LED on the base station will
flash rapidly AND a Beep tone will
be heard in the headset indicating
the microphone is muted.

To unmute, simple press the

Microphone Mute Button again.

(5)

(5)

Note that the Mute function can only be activated during talking mode.

“The base station does not work!”

“My headset does not work!”

Check that the AC adaptor jack is connected to the proper jack on the back
of the base unit as well as a working power wall-socket.

Make sure you are using the supplied AC adaptor.

Check if third LED bar of the

Battery Indicator has flashed once when

connecting the device to a power socket. If not, the setup is improper, try
again or contact your local distributor for support.

(9)

Check that the telephone is connected to the base unit’s

Telephone

Jack, and that it’s firmly connected.

Headset may be out of operational range, move closer to the base station
during initial setup, as interference and reception range varies across
different office environments.

Make sure that the headset battery has been charged fully, place headset
inside the base station’s cradle to charge. If the LED indicator

on the

headset or the base station

fails to indicate battery charging, the battery

maybe dead, contact your local distributor for battery replacement.

The listening volume on the headset may be too low. Rock the

Listening Volume Knob on the headset up.

The headset may have been un-registered from the base station, try re-
registering it following the instructions in Section D of this user manual.

(17)

(8)

(7)

(13)

L. Frequently Asked Questions

WT99 WIRELESS TELEPHONE HEADSET

your true wireless handsfree office solution!

16

15

Advertising