Acrosser AES-HM76Z1FL - Manual (Page 53)

AES-HM76Z1FL User Manual
53 www.acrosser.com
• How do I connect the second monitors to my system?
• Basically, there are “duplicate” and “extend” mode for the second monitor.
• “duplicate” mode – you will see the same contents on both monitors.
• “extend” mode – your monitors display different contents, and you can drag
your contents between the first and second monitor.
• Ensure the display device setting is correct and monitor cables are connected
well.
• For device setting, it could be different because of different operating systems
and S/W version.
• You can search from “Google” as reference setting.
• If the problem still exist, please contact Acrosser FAE or authorized sales
channels.
Q 9. My system has audio problem?
• Make sure to enable the on-board audio function in BIOS menu.
Aptio Setup Utility - Copyright © 2012 American Megatrends, Inc.
Version 2.15.1226. Copyright © 2012 American Megatrends, Inc.
→← : Select Screen
↑↓ : Select Item
Enter : Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit
LAN1
LAN2
Audio
SB USB Configuration
Graphics Configuration
Main Boot Chipset Advanced
[Enabled]
[Enabled]
[Auto]
Security Save & Exit
• Make sure the audio driver and device was installed successfully.
• Make sure the speaker is connected to the correct connector.
• Check if the audio function is set to “MUTE”.
• Please adjust the audio volume louder.