Acrosser AES-HM76Z1FL - Manual (Page 68)

68
FAQ
Why Linux operating system cannot re-install by the same storage device?
Make sure the original data had been cleaned on the storage device which will be installed for.
- It is recommendation to format the storage device before the installation.
Why the display abnormally on screen during Linux installing?
1. Change the other one monitor and try to install again.
2. OS installs in basic graphics mode.
Why the display resolution only for 800x600 and 1024x768 at X Window under Basic
Graphic Mode?
1. Make sure the Vender and Project of monitor detected correctly on the Display configuration.
2. Contact your monitor vender to get the driver for Linux.
3. To adjust setting in XORG.CONF.
- To determine the interval between the two frequencies (Max. and Min.) for both horizontal scanning and
vertical scanning which are by your monitor supporting.
For example:
HorizSync 30.0 - 80
VertRefresh 50 - 75
- Add the frequencies in XORG.CONF for that "vesa" device and monitor.
- Reboot system.
Does my system support Windows 8?
The system is designed and verified with , Windows 7, Fedora 17 and Ubuntu 12.10. But, we did not verify this
system with Windows 8. Please check with Acrosser local sales rep. or authorized channels who will help you to
confirm whether we have provided new Windows 8 driver..
Why do we get error message when we execute utility program?
1. Make sure all the drivers have been installed correctly.
2. If the problem did not solve, please contact Acrosser FAE or authorized channels.
What can I do if my system does not power on?
If your system can not power on via adapter, below are a few steps you can follow to attempt to correct the
issue.

Ensure that the power cord and AC adapter are plugged solid and not loose fitting.