Acrosser AR-B9612 - Manual (Page 45)

4-14 AR-B9612 User’s Guide
4.6 PASSWORD SETTING
This BIOS Setup has an optional password feature. The
system can be configured so that all users must enter a
password every time the system boots or when BIOS Setup is
executed. User can set either a Supervisor password or a
User password.
4.6.1 Setting Password
Select the appropriate password icon (Supervisor or User) from
the Security section of the BIOS Setup main menu. Enter the
password and press [Enter]. The screen does not display the
characters entered. After the new password is entered, retype
the new password as prompted and press [Enter].
If the password confirmation is incorrect, an error message
appears. If the new password is entered without error, press
[Esc] to return to the BIOS Main Menu. The password is
stored in CMOS RAM after BIOS completes. The next time
the system boots, you are prompted for the password function is
present and is enabled.
Enter new supervisor password:
4.6.2 Password Checking
The password check option is enabled in Advanced Setup by
choosing either Always (the password prompt appears every
time the system is powered on) or Setup (the password prompt
appears only when BIOS is run). The password is stored in
CMOS RAM. User can enter a password by typing on the
keyboard. As user select Supervisor or User. The BIOS
prompts for a password, user must set the Supervisor password
before user can set the User password. Enter a 1-6 character