Acrosser AR-B1673 - Manual (Page 27)

AR-B1673 User’s Guide
5.5 PNP/PCI CMOS SETUP
This section is used to configure PCI / Plug and Play features. The <PCI & PNP Setup> option configures the PCI
bus slots.
Power Management
Reset Configuration Data
This field allows you to determine whether or not to reset the configuration data. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices automatically. However, this capability
needs you to use a PnP operating system such as Windows 95. The default value is Auto[ESCD].
IRQ/ DMA Resources
These options specify the bus that the named IRQs/DMAs lines are used on. These options allow you to specify
IRQs/DMAs for use by legacy ISA adapter cards. These options determine if the BIOS should remove an IRQ/DMA
from the pool of availability of IRQs/DMAs passed to the BIOS configurable devices. If more IRQs/DMAs must be
removed from the pool, the end user can use these PCI/PnP Setup options to remove the IRQ/DMA by assigning
the option to the ISA/EISA setting. The onboard I/O is configurable with BIOS.
27