Dolby Laboratories DP572 - Manual (Page 61)

Dolby E Multichannel Distribution System User Manual
5-1
Chapter 5
System Specifications
Audio Encoding Method Dolby E
Frequency Response 20 Hz – 20 kHz ±0.25 dB
Distortion < 0.01% at 1 kHz; < 0.02%, 20 Hz – 20 kHz
Dynamic Range > 110 dB
Sampling Rate 48 kHz
Video Frame Rate 29.97 Hz (NTSC); 25 Hz (PAL)
Encoding Delay 1 video frame (fixed)
Output Data Width 20-bit (8 channels); 16-bit (6 channels)
Dolby E Configurations User Selectable: 5.1/5.1+2/5.1+1+1/4x2/3x2/8x1/6x1/Other
Dolby E Concatenations 10 encode/decode concatenations (minimum)
PCM Delay Same as Dolby E encoding delay (1 video frame)
Digital Audio I/O Four BNC female connectors, AES-3ID-1995/SMPTE 276M
Dolby E I/O Two BNC female connectors, AES-3ID-1995/SMPTE 276M
PCM Delay I/O Two BNC female connectors, AES-3ID-1995/SMPTE 276M
LTC I/O BNC female connector
Remote Port
RS-232, 8-pin female mini DIN on the front panel
RS-485, 9-pin female D on the rear panel
Status Port TTL levels, 9-pin female D on the rear panel
Auxiliary Port RS-485, 9-pin female D on the rear panel
10BASET Port RJ-45 female jack connector on the rear panel
Dimensions
Size: 1 rack unit, 1.75 x 19 x 12.75 inches (44 x 483 x 324 mm)
Weight: 6.0 lb (2.7 kg)