Witch, Ettings, 2 select amc.2 e2 support – ADLINK aTCA-6200A User Manual
Page 25
Advertising
25
3.3.5
Switch Settings
3.3.5.1 Set Blade Operation Mode
Use Pin 2 of switch SW11 to set the Blade Operation Mode. Users can choose Normal Mode for
operation with chassis or Standalone Mode for operation without chassis. Detailed settings are listed
below.
Options
Pin1
Pin 2
Pin 3
Pin 4
Normal Mode
Off
Off
On
Off
Standalone Mode
Off
On
On
Off
3.3.5.2 Select AMC.2 E2 Support
Use Pin 4 of switch SW11 to set the routing of LAN3/4 to Intel 82580EB to support AMC.2 E2 or to RTM.
Detailed settings are listed below.
Options
Pin1
Pin 2
Pin 3
Pin 4
2x Serdes to RTM
Off
Off
On
Off
AMC.2 E2 Support
Off
Off
On
On
Advertising