ADLINK ASD26-MA2 Series - Manual (Page 7)

1.2.6. Power On to Ready:
Type Average Latency
Power on to Ready 1s
Table 4: Latency Specifications
Notes: 1. Write cache enabled
2. Device measured using Drive Master
3. Power on to ready time assumes proper shutdown
(Power removal preceded by STANDBY command)
1.2.7. Compatibility
-- SATA Revision 3.0 compliant
Compatible with SATA 1.5 Gb/s, 3.0 Gb/s & 6.0 Gb/s interfaces
-- SATA Revision 2.0 compliant (ASD26-HA2XXX-ET)
Compatible with SATA 1.5 Gb/s, 3.0 Gb/s interfaces
-- ATA/ATAPI- 8 compliant
-- SSD enhanced SMART ATA feature set
-- Native Command Queuing (NCQ) command set
-- TRIM supported
1.2.8. Certifications
Certification Description
CE compliant
Indicates conformity with the essential health and safety
requirements set out in European Directives Low voltage
Directive and EMC Directive
RoHS compliant Restriction of Hazardous Substance Directive
Table 6: Device Certifications
1.2.9. Power Management
-- 5V SATA
-- SATA interface power management
-- OS-aware hot plug/removal
Specification 7