ADLINK ETX-Proto - Manual (Page 27)

Page 27 ETX-Proto User’s Manual
6.15 Storage Devices
CN16: FDD / LPT FDD Mode
To configure to FDD or LPT Mode,
see JP5 settings on p. 31. Pin Signal Pin Signal
1 Ground 2 Driver density selection
3 Ground 4 N.C.
5 Ground 6 N.C.
7 Ground 8 Index
9 Ground 10 N.C.
11 Ground 12 Driver select 1
13 Ground 14 N.C.
15 Ground 16 Motor enable 1
17 Ground 18 Direction
19 Ground 20 Step
21 Ground 22 Write data
23 Ground 24 Write gate
25 Ground 26 Track 00
27 Ground 28 Write protect
29 Ground 30 Read data
31 Ground 32 Side 1 select
33 Ground 34 Diskette change
1 2
33 34
LPT Mode
Pin Signal Pin Signal
1 Ground 2 AUTO FEED-
3 Ground 4 N.C.
5 Ground 6 N.C.
7 Ground 8 DATA 0
9 Ground 10 N.C.
11 Ground 12 ACKNOWLEDGE-
13 Ground 14 N.C.
15 Ground 16 BUSY
17 Ground 18 INITIALIZE-
19 Ground 20 SELECT INPUT -
21 Ground 22 PAPER EMPTY
23 Ground 24 SELECT +
25 Ground 26 DATA 1
27 Ground 28 DATA 2
29 Ground 30 DATA 3
31 Ground 32 ERROR -
33 Ground 34 DATA 4