ADLINK CSA-5100 - Manual (Page 32)

32
CSA-5100
CSA-Z8X10 LAN Bypass Port Pairing
LAN Bypass Pair 1: LAN1 & LAN2
LAN Bypass Pair 2: LAN3 & LAN4
LAN Bypass Pair 3:
LAN5 & LAN6
LAN Bypass Pair 4: LAN7 & LAN8
5.2 BIOS Settings
The default behaviour of the CSA-5100's LAN Bypass function is set in the BIOS.
• Bypass Enabled:
LAN Bypass is enabled until the system boots into OS and is
disabled by software control or by pushing the Bypass Button.
• Bypass Disabled:
LAN Bypass is disabled until the system boots into OS and is
enabled by software control or by pushing the Bypass Button.
The LAN Bypass BIOS setting is set by entering the BIOS setup menu: Advanced > LAN
Bypass Configuration > LAN Bypass Setting, choose "Bypass" or "No Bypass". The BIOS
factory default setting is "No Bypass".