ADLINK iSeries Monitor 18/21 - Manual (Page 55)

Driver Installation 43
TPZ-1300
x:\Driver Installation\Topaz\TPZ-1300\LAN-Intel\
where x: denotes the DVD-ROM drive.
3. Execute setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.4 Installing the audio driver
This section describes installation of the audio driver for the
TPZ-1300. The TPZ-1300 supports High Definition audio using the
Realtek ALC269 audio codec. To install the audio driver:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The audio driver is
located in the directory
x:\Driver Installation\Topaz\TPZ-1300\Audio\
where x: denotes the DVD-ROM drive.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.5 Installing the WDT and DI/O drivers
A WDT (watchdog timer) is a hardware mechanism resetting the
system when the operating system or application is halted. A typi-
cal usage of WDT is to start the timers and periodically reset the
timer, and when timer is expired, the system resets. The WDT
driver must be installed to program the WDT.
The TPZ-1300 also provides 4 channel DI and 4 channel DO.
WDT and DI/O Driver/ API driver packages must be installed to
access and use the DI/O feature.
To install the WDT and DI/O drivers for the TPZ-1300:
Close any running applications.
Ensure you have Administrator privilege.
Download Microsoft
®
Visual C++ 2005 Redistributable Package
x86 or x64 version from: http://www.microsoft.com/en-us/down-
load/details.aspx?id=3387