Advanced Control Technologies SA3120WW-3500K (LED Tube, Stand Alone, 3ft., Warm White, 120VAC, 14W) - Manual

1. Environmentally Positive
StandAlone LED Lites are a direct replacement for fluorescent lamps. They use no mercury or lead, which
plays a positive role in protecting the environment. By contrast, fluorescent lamps are the largest source of
mercury contamination in municipal landfills. After radioactive substances, mercury is the most toxic pollutant.
2. Saves Money
Lighting represents 26% of the energy consumed in a building and it has always been a target for reduction.
Power consumption of the 4 foot StandAlone LED Lite is 55% less than conventional T-12 fluorescent lamps at
40 Watts and less than newer T-8 lamps at 32 Watts. Replacement labor expense is reduced with StandAlone
LED Lites, as their expected lifetime is in excess of 50,000 hours and there are no ballasts to replace.
Expected life of T12 and T-8’s are only 10,000 and 20,000 hours respectively and at the end of their useful life
disposal of their toxic remains is costly. There is no costly disposal associated with StandAlone LED Lites.
3. Intelligent Control Model Available (allows dimming and other remote features)
The dimming model controlLED Lites (an ACT patent pending product) uses an external LED Driver/Signal
conditioner mounted in place of the ballasts (same footprint and fits under the ballast cover). It accepts a
0-10VDC control signals and provides features like local or remote dimming, dimming adjusted by ambient
daylight plus automatic ON/OFF from an occupancy sensor. Other control methods are available depending on
your specific needs. See our controlLED Lites Brochure for information.
4. Longer Lifetime
Typically, LEDs have a minimum life time of 50,000 hours or more, while fluorescent lamps typically last 10,000-
20,000 hours. This equates to a greater life for the StandAlone LED Lite of two and one half to five times longer.
This makes the StandAlone LED Lite perfect for large office spaces that are difficult to re-lamp without disturb-
ing personnel, and light fixtures in factories or warehouses that are difficult to access. StandAlone LED Lites
have an even longer life when dimmed or when used in low ambient temperatures.
5. Light Not Heat
Conventional fluorescent lamps and their ballasts generate heat, which places a burden on the air conditioning
system of a building. StandAlone LED Lites convert almost all of the electrical energy into light which saves
money when trying to cool a building. Studies suggest that the additional savings from reduced air conditioning
demand in warmer climates, could generate as much as an additional 50% of the savings achieved in operat-
ing StandAlone LED Lites versus fluorescent lamps.
6. Quiet
The StandAlone LED Lite does not require the use of a ballast and therefore makes no humming or buzzing
noises. It is an excellent choice for maintaining quiet environments in libraries and offices.
StandAlone
LED Lites
The Future of
Commercial
Lighting
StandAlone
LED LITE
Energy Saving,
Shatterproof,
and Nontoxic
E331397