Advanced Control Technologies SA4120WW-3500K (LED Tube, Stand Alone, 4ft.,Warm White, 120VAC, 18W) - Manual (Page 3)

3
120 VAC SA4120 LED Lamps Installation Instructions
P/D 111510
ADVANCED CONTROL TECHNOLOGIES, INC.
Indianapolis, Indiana 46250
WARNING
Risk of fire or electric shock. The electrical rating of these products are 120 VAC for model SA4120. The
installer must determine whether they have 120 VAC at the luminary before installation.
Retrofit kit installation requires knowledge of fluorescent lighting luminaires electrical systems. If not
qualified, do not attempt installation. Contact a qualified electrician.
Install this kit only in the luminaires that have the construction features and dimensions shown in the
photographs and/or drawings.
CAUTION
Risk of electric shock - Use In dry locations only. This device is not intended for use with emergency
exit fixtures or emergency exit lights. Not for use in Luminaires controlled by a dimmer.
WARNING
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED.
THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A FLUORESCENT RECESSED
LUMINARY WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR
AUTHORITIES HAVING JURISDICTION.
For use only with UL and C-UL Listed Surface, type IC recessed, type Non-IC Recessed Mount or surface
mount Fluorescent Luminaires with or without Diffuser which can fit up to 6 lamps.
The end retrofit luminary has been modified and can no longer operate the originally intended lamp.
WARRANTY
Five year warranty subject to limitations. See Warranty/RoHS Info link on the main page of our web site at
www.act-solutions.com.
SA4120 Lamp Replacement - If lamps are still under warranty contact:
Advanced Control Technologies, Inc.
6805 Hillsdale Court
Indianapolis, IN 46250
Tel:
317) 806-2750
(800) 886-2281
Fax: (317) 806-2770
Email: [email protected].
ABOUT SA4120'S CERTIFICATION
Federal Communications Commission
This device complies with CFR 48 Part 18 of the FCC rules.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital apparatus as
set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the
Industry Canada.