Advanced Control Technologies SA4200WW-3500K (LED Tube, Stand Alone, 4ft.,Warm White, 240/277VAC, 18W - Manual

1
240/277 VAC SA4200 LED Lamps Installation Instructions
P/D 111510
ADVANCED CONTROL TECHNOLOGIES, INC.
Indianapolis, Indiana 46250
240/277 VAC StandAlone LED Lamps Installation Instructions
Figure 1 - Six lamp fixture (maximum) installation example.
BEFORE YOU BEGIN...
READ THESE INSTRUCTIONS ENTIRELY
You may need several short lengths of extra wire per fixture to complete the transition to LED lamps. Use
18 AWG solid wire and appropriate size wire nuts. Check the package contents which should include:
1. SA4200 LED Lamp
2. Fluorescent fixture LED retrofit label
3. Installation Instructions
** IMPORTANT SAFETY INSTRUCTIONS **
PREPARATION FOR INSTALLATION OF LED LAMPS
DANGER
RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION
1. Turn off the power to the light fixture at the breaker panel.
2. Open (or remove) the diffuser from the light fixture.
3. Remove the fluorescent lamps. Please dispose of these items properly as they contain mercury.
4. Remove the wiring cover to expose the fluorescent ballast. See Figure 2, next page.
SA4200