Altech UEC PVR9600Q High Definition Dual Tuner - Manual (Page 7)


Lock Fascia Buttons

Auto Standby

RCU model
Lock Fascia Button (access via Menu > Settings > General > Lock
Fascia Buttons)
Default setting: Disabled
You have the option (Enable or Disable) to lock the front panel
buttons as preferred.
1. If set to Enable, the front panel buttons is inoperable even if
pressed.
2. If set to Disable, the front panel buttons operate as per
normal when pressed.
4. Press the # button again to enable back the channel.
Auto Standby (access via Menu > Settings > General > Auto
Standby)
Default setting: OFF
You have the option to select the desired number of hours (1, 2,
5, 12, 24, OFF) before the PVR goes on standby due to inactivity.
The timer starts from the last command received via remote
control or front panel up to the set auto standby time indicating
inactivity during this time.
NOTE: The PVR will still record all scheduled and series tag
recordings even on standby.
RCU model (access via Menu > Settings > General > RCU model)
Default setting: Type 1
NOTE: This option is only for those users where the standard
remote (type 1) is affecting the functionality of their TV.
Contact Altech UEC if you are experiencing this issue.
If you receive a new remote (type 2) from us,
1. Select RCU model then press the right arrow ( >) key.
2. A message appears on screen. Press the button on the
remote to confirm the change to type 2 and the PVR
restarts.
3. After the PVR has successfully restarted, the RCU type 2 is
now enabled and you can start using this new remote.
4. Discard the old remote.