Altech UEC DSR 4639 - Manual (Page 9)

9 | P a g e
©
Copyright 2012 Altech UEC (Pty) Ltd
2 FRONT PANEL
1 STANDBY Button Switches the decoder between ON and STANDBY modes.
2 Smartcard Slot Behind the Front Panel Cover. ( see 4 )
3 LEDs
Bi-colour
RED/GREEN
AMBER GREEN
Indicates response to remote control commands and/or error mode
RED = Decoder in standby mode or an error condition has occurred.
GREEN = Normal operation.
Flashes = when there are incoming messages
Flashes = when RCU command received.
4 Front Panel Release Opens the front panel when pulled.
5 Front Panel
LED Display
Displays the time (Standby Mode) or displays the selected
TV channel. Front panel with display “REC” if there is a recording
in progress
6
6
VOL< Decreases the volume level.
7 VOL ˃
Increases the volume level.
8
8
CH ˃
Changes to the next available channel.
9 CH ˃
Changes to the previous available channel.
10 OK Accepts the selection.
11 RESET Press to Reboot the decoder, i.e. if decoder freezes etc.
1 2 3 4 5 6 7 8 9 10 11