Altech UEC DT 3900 - Manual (Page 12)

12
4. BASIC SETUP. HOME THEATRE
For this Set Up use your preferred video connection, the example below
shows video connection via YPbPr, you can use other methods from the
previous examples. You will also need an optical fiber cable for the audio.
All of video output modes are ready.
4.1 Prepare your equipment
Make sure that your TV has an YPbPr input.
Be sure the using amplifier has a SPIDF fiber input.
Ensure that the power leads to the TV, the Set Top Box and the amplifier
are unplugged before you commence the set up procedure.
4.2 Connecting Video and Audio
Video
Connect the YPbPr cords from the YPbPr output of the Set Top Box to the
YPbPr input of the TV.
Audio
a) Connect the fiber optic cable to the SPDIF connector on the rear of the set
top box.
b) Connect the other end of the fiber cable to the SPDIF input on an
Amplifier.