Amaircare 10000 - Manual (Page 2)

2
Table of Contents
Rules for Safe Installation and Operation ................1
Shipping and Packing List........................................1
Specifications ..........................................................2
Introduction ..............................................................2
General Information..................................................3
Product Application Guidelines ................................3
Parts Identification ..................................................4-5
Physical Dimensions of Units ................................6-7
Dealer Installation Instructions ..............................8-10 Operation ................................................................11
Maintenance ............................................................12
Filter Change Schedule ....................................12
Filter Changing Guidelines ................................12
Dealer Filter Change Instructions ........................13-14
Dealer Motor Assembly Replacement Instructions ............15
Electrical Diagrams ..............................................16-17
Replacement Parts ..................................................18
Specifications
AWW-350 AWW-675 8500 10000
Nom. Air Flow @ 120VAC @ 0.0” E.S.P. 350 cfm 675 cfm 850 cfm 1000 cfm
Weight (max - unpackaged) 30 lbs. 33 lbs. 125 lbs. 130 lbs.
Supply Voltage 120 VAC 120 VAC 120 VAC 120 VAC
Nom. Measured Power Consumption 125 Watts 225 Watts 360 Watts 600 Watts
Motor Current Draw - Total 1.0 amps 1.8 amps 3.6 amps 4.8 amps
Air Intake Collar (max) 8”-round 10”-round 10”x12” 10”x12”
Air Outflow Collar (max) 6”-round 8”-round 10”x12” 10”x12”
Operating Temp. Range - Return air (ºF) 30 to 95 30 to 95 30 to 95 30 to 95
HEPA filter efficiency = 99.97% @ 0.3 micron particles
Ambient temperature range: -40ºF to 130ºF
For 220 VAC Units (only sold outside N. America)
Nom. Measured Power Consumption
75 Watts 150 Watts 255 Watts 300 Watts
Motor Current Draw - Total .34 amps .7 amps 2.0 amps 1.2 amps
Introduction
Congratulations! You will quickly realize that you have
purchased a very effective air cleaning system. It
incorporates state of the art HEPA (High Efficiency
Particulate Air) technology.
Your Amaircare HEPA system comes with a limited
warranty. With proper attention to its care and mainte-
nance, you will receive optimum performance.
If your indoor air has abnormally high concentrations
of particulates, the life span of the filter media may be
shortened. Excessive particulates in the air will reduce
the expected life of the HEPA filter. Under normal con-
ditions the HEPA filter will last from two to five years.
The optional activated carbon canister has a finite limit
as to the amount of odor or other gaseous volatile
organic compounds (V.O.C.’s) that it can adsorb. The
higher the concentrations, the shorter the expected
life. Higher humidity may shorten the life of the carbon
canister. Under normal conditions, the carbon canister
should last up to 12 months.
Initially, the HEPA filter’s particulate removal efficiency
improves with use. However, the air flow through the
HEPA filter media will decrease, as dust builds up on
the filter, thus lowering its ability to circulate and clean
as much air as when it was new. If the air flow through
your unit is noticeably reduced, you can inspect the
pre-filter and HEPA filter to see if they should be
replaced. Replacement (or washing if foam) of the pre-
filter every 3 months will help extend the life of the
HEPA filter.
Please contact your local Amaircare dealer regarding
replacement of filter media, warranty information or if
you have any questions or concerns about the perfor-
mance of your HEPA system.
NOTE: This filtration system is an ADDITIONAL
filter, and does NOT replace the existing air
handler/furnace system filter.