Initial calibration with ambirscan 2.0 – Ambir TravelScan Pro series User Manual
Page 8
- 7 -
d) Users with Windows 2000, ME, and 98SE operating systems may see the “Windows
Logo” compatibility warning screen when installing the driver/hardware. We
assure you that your scanner
has been fully tested and is compatible with these
systems. Simply click the “Continue Anyway” button and proceed with the final
installation.
Initial Calibration with AmbirScan 2.0
Note:
Calibration is a critical step in setting up your scanner. It allows the image quality to
be “balanced” for your computer and scanner combination. If at any time you
switch the computer that you use with your scanner, or change scanners, you will be
required to calibrate again.
Launch AmbirScan 2.0
to
begin.
a) To open the AmbirScan 2.0
application double-click the AmbirScan 2.0 shortcut
icon on your desktop.
b) Once you have launched AmbirScan 2.0, select the SCAN button and the
step-by-step calibration instructions will appear in a succession of prompts.