American Energy Systems MF3540 Fuel Stirrer Motor - Manual

F:\AESBusinessSystems\AES Technical\Piece part instructions\MF3540 Fuel Stirrer Motor.doc
MF3540 Fuel Stirrer Motor
All Magnum Countryside units and 7500 (from 2006 to present)
• Turn off power on control panel and
unplug from the power supply.
• Disconnect the fuel stirrer motor leads
from the wire harness.
• Remove MF3517 fuel stirrer sprocket and
inspect, replace if necessary. Makes sure
and loosen both set screws on sprocket)
• Remove existing fuel stirrer motor
as shown.
(Save the mounting hardware if
possible P003099 10-32 x 1 serrated
HWH screw)
• Inspect the gasket (MF3578) replace if
necessary.