American Energy Systems BC2077 Door User Manual
American Energy Systems Kiln
Advertising
F:\AESBusinessSystems\AES Technical\Piece part instructions\BC2077 Door Assembly.doc
Door Assembly Instructions
Part #BC2077, BC2076 & BC2078
For Models Baby Countryside units
• Verify the collar is adjusted to 2 ¼” from the
end as shown.
• Slide the handle through the door and into the
spring and cam as shown. Line the set screw on
the cam up to the dimple in the door handle.
• Tighten the set screw.
• If adjustment necessary.
• To adjust the door latch press the cam against
the door, slide the collar toward the cam until
the allen wrench hits the door and can go no
further.
• Tighten the set screw
Dimple on door handle
Advertising