American Energy Systems CF25 Room Fan Blower - Manual

F:\AESBusinessSystems\AES Technical\Piece part instructions\CF25 Furnacne assembly.doc
Room Fan Blower Assembly Complete
#CF25
For 6500 & 7500 furnance
• CF31 Blower Housing w/ mounting feet
• CF32 Blower Capacitor
• CF33 Blower motor
Wire connections:
• Red wire for low output (not used)
• Yellow wire high output
• Black common
• Remove all parts from boxes.
• Mount the mounting bracket to the blower motor see instruction. Make sure that all 3 legs of bracket are
equal and the there is amount 2 holes shown.
• Add a male connector to the black and
yellow lead from the blower motor.
Connect the capacitor to the blow leads in
position shown.
CF32 Blower capacitor
CF31 blower housing w/ hardware
2 holes shown