American Energy Systems Ventilation Air Blower - Manual

GROUND (GREEN WIRE)
120V (BLACK WIRE)
3. PULL BLACK WIRE BETWEEN INGLENOOK ELECTRICAL BOX & RHEOSTAT ELECTRICAL BOX.
4. INSTALL RHEOSTAT, COVER PLATE, RHEOSTAT CONTROL KNOB.
5. WIRE INGLENOOK ELECTRICAL BOX/DUPLEX RECEPTACLE PER NATIONAL/LOCAL CODES.
6. CERTIFIED ELECTRICAN TO COMPLETE ALL ELECTRICAL WORK.
2. PULL WIRES FROM CIRCUIT BREAKER PANEL TO RHEOSTAT ELECTRICAL BOX.
1. INSTALL RHEOSTAT ELECTRICAL BOX
PER CUSTOMER SPECIFIED LOCATION.
15A DUPLEX ELECTRICAL
RECEPTACLE
NEUTRAL (WHITE WIRE)
INGLENOOK
NEUTRAL (WHITE WIRE)
GROUND (GREEN WIRE)
RHEOSTAT DETAIL
WIRES TO INGLENOOK
ELECTRICAL JUNCTION BOX
120V OUT
BLACK
120V, 15A (dedicated) CIRCUIT
FROM CIRCUIT BREAKER
PANEL
120V IN
BLACK
CIRCUIT BREAKER
PANEL
RHEOSTAT
#1
#2
#3
#4
#5
INGLENOOK VENTILATION AIR
BLOWER OPTION, MODEL IN-6200
Country Flame Technologies
A Division of American Products, LLC
900 George Street
Marshfield, MO 65706
417-859-0990
417-859-0192
www.countryflame.com
COUNTRY FLAME TECHNOLOGIES
INSTALLLATION, OPERATION, AND MAINTENANCE MANUAL
© 2004 COUNTRY FLAME
WARNING: If the Inglenook blower installation does not conform to
National Electrical Code, a shock hazard will result. This shock hazard
can be fatal under certain conditions. Use a certified electrician to
perform and ensure conformance to National and local codes.
FOR YOUR SAFETY
Installation and repair is to be performed by a qualified service person.
Improper installation and non-conformance to National and Local Codes can
create safety hazards and impact homeowner insurance. Contact a local
authorized dealer or Country Flame direct for additional information, if
required.