American Sanders RS-16DC Rotary Sander - Manual (Page 6)

EN ENGLISH
-6- Clarke ® American Sanders Operator's Manual (EN) - RS-16 HDTR
Lugs
Slots
Figure 1
Figure 2
7
LENGÜETAS
RANURAS
TENONS
FENTES
5
4
6
3
2
1
HOW TO PREPARE THE MACHINE FOR
OPERATION
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping car-
ton and the machine for damage. If damage is evident, save the
shipping carton so that it can be inspected. Contact the Clarke
Customer Service Department.
KNOW YOUR MACHINE (Figure 1)
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release - OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
WARNING! This machine contains moving
parts. To reduce the risk of injury,
always unplug the power cord before
servicing.
INSTALLING THE PAD DRIVER
Align the lugs with the corresponding slots in the pad driver
and turn the pad driver counterclockwise to lock it in place
(figure 2). To remove pad driver, give it a quick hard turn
clockwise.
CAUTION! Using the wrong pad on this machine
can overload the motor.