AMT Datasouth M1 - Manual (Page 15)

11
3.2.4 Loading Media in Cutter Mode (Optional)
1. Refer to section 3.2.1 to load the media.
2. Lead the media through the cutter paper opening.
3. Close the top cover gently.
4. Use “Diagnostic Tool” to set the media sensor type and calibrate the selected sensor. (Start
the “Diagnostic tool” Select the “Printer Configuration” tab Click the “Calibrate Sensor”
button)
Note:
Please calibrate the gap/black mark sensor when changing media.
Cutter paper opening