AMT Datasouth Documax 5380 - Manual

Ribbon mask
Ribbon guide
Print head
Ribbon cartridge
PACKAGE CONTENTS:
PRINTER OVERVIEW:
Front
Rear
INSTALLATION:
Paper Support
Ribbon
Installing the Paper Support
As shown to the left, open the Top Cover
and align tabs A,B,C of the support tray
over the corresponding slots on the
printer. Press downward on the Paper
Support until tabs A,B,C are completely
locked into place.
Paper guide
Top Cover
Power switch
Pinch roller
assembly
Control panel
Ribbon cartridge
Print head
Paper support
Gap adjust lever
Tractor
Paper select lever
AC power inlet
USB interface
Ethernet interface
Serial interface
Installing the Ribbon
1. Turn off the printer, open the
top cover, make sure the print
head is cool and slide the
carrier to the middle of the
printer.
2. Adjust the Gap Lever to the
highest position (#9).
3. Pull out the Pinch Roller
Assembly and rotate it upward
to expose the print head
assembly.
4. Lock the ribbon cartridge into
the printer chassis.
5. Carefully slide the plastic
Ribbon Guide holes onto the
left and right carrier pins.
6. Rotate the ribbon feed knob in
the direction of the arrow to
remove any slack.
1
2
3
4
6
5
UP Position ~ Cut Sheet
DOWN Position ~ Tractor Feed
QUICK START GUIDE
February 2013 Doc #131024C
Paper support
Top Cover
Documax 5380
http://www.amtdatasouth.com/support-1/downloads/
Printer
CD ROM
(Including user's guide and driver)
Paper Support
Ribbon Cartridge
Power Cord Quick Start Guide
USB cable