ANSMANN 1200-0001 ACPS 50W - Manual (Page 7)

> Please pay attention to the correct output voltage and polarity. Too high
voltage or wrong polarity can damage the Netbook Computer
> Do not overload the power supply (see technical details)
> To clean the power supply, disconnect it from the mains and use only a
dry cloth
OPERAtiOn
1. Adjust the Output voltage switch (1) on the bottom side of the power
supply to the correct output voltage (9,5V - 20V) using the key (2). Detailed
information about the correct voltage and polarity can be found inside the
manual of the Netbook Computer, or on the name plate of the original
power supply.
Please note that incorrect voltage setting or polarity can damage your
Netbook Computer. If you are unsure, do not connect with your Computer.
Consult your local dealer!
2. Connect the correct plug to the connector of power supply (4).
3. Insert the output plug to the appliance (Netbook Computer)
4. Connect the mains lead to the mains socket (100–240V AC).
5. Turn on the Netbook
6. After use, remove the power supply from the mains
tEChniCAL dAtA
Prim.: 100 – 240 V AC / 50-60 Hz
Sec.: 9,5V/12V/14V/16V DC - max. 3A
18,5V DC - max. 2,7A
19V/20V DC - max.2,5A