ANSMANN 5C07092 Energy 4 Set - Manual (Page 4)

 Operating Instructions
Use of the charger:
Charger with automatic refreshing function for fast rechargeable 1-4 Micro AAA
or Mignon AA cells in addition to 1-2 pcs. 9 V blocks. NiCd and NiMH recharge-
able batteries can be charged at the same time.
Features:
• Capacity quick test for the inserted cells for approx. 5 sec
• Autodiagnosis of the inserted cells as soon as contact is made
• Automatic start of a refreshing programme at the beginning of the
charging process when tired cells are detected
• NiCd and NiMH rechargeable cells can be inserted and charged at the same time
• Microprocessor controlled charging and supervision of the charging status
of cylindrical cells and 9 V blocks
• Individual microcontrolled supervision of the charging status for each cell
during the complete charging time
• Individual supervision of every cell position
• -delta V control of each cell
• Faulty cell detection – damaged cells are identified and displayed
• Automatic switch-over to trickle charge
• Clear colour indicators of the rechargeable battery status for each
charging position
• Switch mode power supply for worldwide use (100-240 V AC)
• Battery quick test
After inserting the cells the state of the charge is displayed.
LED green: capacity over 80% of the nominal capacity
LED yellow: capacity between 25 and 80% of the nominal capacity
LED red: capacity under 25% of the nominal capacity
After 5 sec. if the cells are not removed, the unit switches over to autom.
refreshing-charge mode.
LED indicators:
LED flashes red/green „Refreshing“: refresh mode
LED lights red „Charging“: charging process
LED lights green „Ready“: battery fully charged / trickle charge