ANSMANN 5307213 Powerline 4 Globe - Manual (Page 4)

indicatOrs
In the lower part of the charging slots you can find the indicators. Each indicator corresponds to an individual charging slot
LED is blinking green slowly (2 sec on / 2 sec off) : fast charging
LED is constant green: ready /trickle charge (top-off charge)
LED is blinking green fast (1 sec on / 1 sec off): faulty cell
attentiOn
Use only with NiCd or NiMH cells. Non rechargeable batteries or other types (Alkalines etc.) could cause an explosion!
Operation
1a. Using the charger in a mains power outlet:
The charger is constructed for worldwide use. Before use, please fit the right primary adaptor into the charger (see drawing
1. Please pay attention that the adaptor plug clicks audibly into the housing. To release the adaptor please push the release
button (2) marked with “PRESS”
1b. Using the charger in a vehicle:
Connect the DC output plug of the 12V car cigarette lighter adaptor (3) to the DC input socket of the charger (4). Connect
the input plug of the DC adaptor (5) to the vehicle cigarette lighter socket (12V DC). Ensure that the supply to the cigarette
lighter socket is on. Some cars require the ignition to be switched on.
2. Charging: The charging starts as soon as 1 or more rechargeable batteries are inserted into the charging slots.
For perfect performance we recommend to insert the rechargeable batteries beginning from charging slot 1.
It is quite normal that the rechargeable cells may become warm during charging. The cells do not have to be inserted
simultaneously as the charging processes are independent from each other. When charging is finished, the cells are provided
with “Top-off” Charge and trickle charging, so that the cells can remain in the charger until ready for use.
envirOnMent:
Rechargeable batteries are not to be disposed of in domestic waste. Used batteries should be turned into a battery recycling
collection depot. Check with your local municipal office.
Maintenance and cleaning:
To clean the charger, disconnect it from the power adaptor. To ensure correct function of the charger keep the charging
contacts free from dust and dirt. Please only use a dry cloth.
Technical data:
PRI: 100-240 V AC 50-60 Hz
SEC: 800 mA / 400 mA (AA / AAA)