AUDIOLINE Watch & Care BW 1000 - Manual (Page 6)

4
BabyCare BW 1000
lnstruction for Use
1. Press the "On/Off" button to switch on the weigh scale.
2. Press the "On/Off" button again to choose the weighing unit between "lb & oz" and
"kg" before the "0.00" view showing on the display screen
3. The last weighing result should be shown before the "0.00" (kg/ lb & oz) view showing
on the display screen. When both the "0.00" (kg/ lb&oz) and " " signs are shown on
the display screen, the scale is ready for use.
4. lf weighing with an object, such as towel, remember to press "TARE" button to tare the
scale before use. The tare function will be disabled if the weight showing on the dis-
play is over 0.5 kg.
5. Place the infant on the scale when "0.00" (kg / lb&oz) view appears on the display.
6. The figures will be blinking while weighing. The actual weight of baby will be shown on
the display when the word "HOLD" appears. The scale will switch off automatically in
approximately 1 minute.
7. lf there is another weighing, take the infant away first. Press the "HOLD" button until
the display return to "0.00 kg" before another measurement.
8. The weighing tray can be detached by turning the switch, which is located under the
scale. Replace the weighing tray by the weighing plate if indicated.
Follow the direction sign when tighten and loose the tray or plate.
lt is recommended that the weighing plate should ONLY be used if the baby can sit
upright by itself.
Technical data
Unit of Measurement: kg / lb oz
Max. Capacity: 50 kg / 99 lb 15.5 oz
Graduation: 0.01 kg / 0.5 oz
Overload lndicator: "O-Ld"
Low-battery lndicator: "LO"