Aurora Audio GTC2 - Manual (Page 2)

facilitated by the use of Mu-metal encased input transformers and a custom, low emf
radiation, toroidal ac power transformer.
The unit is designed to give years of reliable service.
2. Rear Panel Connections
Power is supplied via an industry standard IEC power connector.
The GTC2 power supply automatically senses the voltage of the ac current you connect
it to.
The fuse is a 1 amp anti-surge (slow blow) 20mm x 5mm. Anti-surge fuses must be used
due to the momentary inrush current to the toroidal power transformer.
The GTC2 MUST be connected to a grounded 3 pin power source.
Audio connections are made via 3 pin XLR connectors, wired pin 2 = hot, pin 3 = cold,
and pin 1 = ground.
In the center of the panel is a 1/4” T.R.S. Jack socket. This is the side chain linking
connector to enable the GTC2 to link to other GTC2 compressors and link their side
chains together for multi-channel compression.
Wiring of the connector is tip = Control dc, and sleeve = 0v (ground) common.
2