AValon RF DX-02 Series - Manual (Page 23)

AVALON RF, INC. Page 20 of 20
DX402/DX502/DX602 User’s Guide & Operating Manual
Appendix A – Remote Programming Option
1. Interface.
The DX402/DX502/DX602 can be remotely programmed via an
RS232C interface. The data rate is set to 9600 Baud, 8 bits, no
parity, 1 stop bit and no handshaking signals. Data is ASCII encoded.
2. Protocol.
<Frequency> <CR> where frequency is any frequency in the tuning
range of the receiver in increments of 250KHz.
E.G.: DX602 -> 2400 <CR> will tune in to 2400MHz
2413.25 <CR> will tune in to 2413.25MHz