Dynex DX-LCD19 - Manual (Page 21)

Using your TV 21
Connecting headphones
Note: Headphones are not included.
To connect headphones:
• Plug the headphones into the headphone jack on the left side of your TV. When
headphones are plugged in, no sound comes from the speakers.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1 Plug the power cord into a power outlet. The power indicator on the front of your TV
lights red.
2 Press to turn on your TV. The power indicator turns blue. Several seconds later, the
video image appears on your TV’s screen.
3 Press again to turn off (put in standby mode) your TV.
Warning: When you turn off your TV, electrical power is still connected to it until the power
cord is unplugged.
Selecting the TV signal source
To select the TV signal source:
1 Press MENU. The OSD opens.
2 Press or to highlight TV, then press to enter the TV menu.
3 Press or to highlight Tuner Mode, then press or
to select Antenna or
Cable.
Selecting the video source
Depending on the video device you have connected to your TV, you can select TV, A/V,
S-Video, Component, VGA, or HDMI as the video source.
To select the video source:
• Press and hold INPUT until the source you want appears.
• Or, press INPUT. When the list of video sources appears, press an arrow button to
select the source, then press ENTER.