Avalue ESM-CDV - Manual (Page 20)

ESM-CDV User ’s Manual
20 ESM-CDV User ’s Manual
2.4 Setting Jumpers & Connectors
2.4.1 AT/ATX mode selector (SW1)
*Default
AT/ATX mode
AT mode ATX mode*
2.4.1.1 Signal Description
–AT/ATX mode selection
AT/ATX mode Description
AT mode
This Mode supports AT power supply, no need
to press Power button to enable power on/off
ATX mode
This Mode supports ATX power supply. Press the
ATX power button to enable power on/off