Avalue ESM-QM87 - Manual (Page 64)

ESM-QM87
64 ESM-QM87 Quick Installation Guide
3.6.3.2.1 .1 LCD Control
Item Option Description
Primary IGFX Boot
Display
VBIOS Default[Default]
CRT
Port-C HDMI
LVDS
Port-D DP
Port-B (Add2 Card)
Select the Video Device which will be activated
during POST. This has no effect if external
graphics present. Secondary boot display
selection will appear based on your selection. VGA
modes will be supported only on primary display.
Add2 card HDMI/DP
select
HDMI[Default]
DP
Select Add2 card display as HDMI or DP.
Active LFP
No LVDS
eDP Port-A[Default]
Select the Active LFP Configuration. No LVDS :
VBIOS does not enable LVDS. Int-LVDS :VBIOS
enables LVDS driver by Integrated encoder. SDVO
LVDS : VBIOS enables LVDS driver by SDVO
encoder. eDP Port-A :LFP Driven by
Int-DisplayPort encoder from Port-A. eDP
Port-D :LFP Driven by Int-DisplayPort encoder
from Port-D(through PCH).
CH7511 EDID Panel
Option
1024x768 24/1
800x600 18/1
1024x768 18/1[Default]
1366x768 18/1
1024x600 18/1
1280x800 18/1
1920x1200 24/2
640x480 18/1
800x400 18/1
Port1-EDP to LVDS(Chrotel 7511) Panel EDID
Option.