Axiomtek ICO300 - Manual (Page 21)

ICO300 Series U ser’s Manual
Hardware Installation 13
Step 3
Loosen 4pcs screws of the cover, and put the HDD into the HDD bracket and
fix the HDD by 4pcs of screws in the accessory bag.
Step 4
Put the HDD bracket on the cover and use 4pcs screws to fix tightly. Takes the
SATA+Power HDD cable and Cable Tie out from the accessory bag and connect
SATA+Power HDD cable to HDD then use Cable Tie to fix it on the HDD bracket,
cut off the lengthy Cable Tie.