Axiomtek GOT3126T-834 - Manual (Page 21)

GOT3126T-834 User’s Manual
Hardware and Installation 15
PCIe device & mSATA device selection (JP6)
The default setting of JP6 is for PCIe mini-card. If you want to install mSATA card on your
system, please remember to set this jumper to
“2-3 close”.
Restore BIOS Optimal Defaults (JP8)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
Function Setting
PCIe device(default) 1-2 close
mSATA device 2-3 close
Function Setting
Normal operation (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close