Babbitt LS8000/2 Multi-Point Sensor - Manual (Page 4)

B. Specifications
Electrical
Power: 115 VAC (±15%) 50/60 Hz. 3 watts,
standard.
(12 VDC, 24 VDC or 230 VAC optional)
Output: 3 relays, each with 1 form C contact, SPDT,
10 amp resistive at 115 vac, 8 amp at 220
VAC, 5 amp at 30 VDC
Fuse: On board, 250 mA
RF Frequency: Approximately 700 KHz
Environmental
Hazardous Area: Class I, Group C & D, Class II, Group E, F
and G
Receiver: open printed circuit board can be
put in enclosure as required by application.
Temperature: Probe: -30° F to 400° F (Higher on request)
Electronics: -40° F to 185° F
Pressure: Probe: 1500 psi @ 75° F. (Higher ranges available on request).
Construction: Probe: All wetted parts, 316 SS, Teflon and Viton. (A coating is applied in
some applications to the 316SS probe.)
C. Ordering Information
2