Chicago Gaming Nicktoons Racing - Manual (Page 20)

8.1.3.1. Power
Restore on AC/Power Loss = Power On
Ring-in Power on = Disabled
PCI Device Power On = Disabled
RTC Alarm Power On = Disabled
8.1.3.2. Boot
Quick Boot Mode = Enabled
Boot Up Num-Lock = On
Boot To OS/2 = NO
Boot to Network = Disabled
8.1.3.3. Boot Device Priority
(The order should be CD drive, then Hard drive. The position is not important. Here is an example)
1
st
= CD/DVD-0:
2 nd = IDE-0:{your C: drives name, i.e. Maxtor 2F020L0}
3 rd = Disabled
4 th = Disabled
Try other Boot Devices = Yes
8.1.3.4. Exit
These settings allow you to save or discard your changes
8.2. Reloading software
If the BIOS setting are intact, insert the Boot CD into the CD drive and boot the machine. Follow instructions
from the boot CD. This will erase the hard drive Nicktoons(C:) and reload all software and revert all
adjustments back to factory settings (nothing is saved). After reloading the game (and removing the CD), power
cycle the game, wait for it to start, then press F1 and ALWAYS calibrate your 4 controls! You can also modify
your adjustments (if any). Do not forget to turn watch dog back on (press & hold Switch S1 until LED CR2 is
off or blinking).
For assistance with your game call (708)780-0070, ask for
technical support.
Copyright © Chicago Gaming Company
Page 20